You, as always, threw the laundry intended for washing into the washing machine, pressed start, and after some time, to your surprise, discovered that the washing was paused and the 5D error was on Samsung washing machineYou may also have noticed that there's an excessive amount of foam in the drum. Although this isn't always the case.
What does this error mean?
Most Samsung washing machines have a built-in foam control system. If the amount of foam in the drum exceeds the limit, a program is activated to address the issue. Error codes 5D, SUD, or SD mean only one thing: this program has failed, and the machine is now waiting for the foam to decrease on its own.
You can fix the 5D error yourself in the following cases:
In most cases, this error code on Samsung washing machines is just a warning, and you don't really need to take any action. Just wait for the excess foam to settle, then the machine will continue the wash cycle automatically. After washing, it is recommended to check:
- Serviceability drain filter, perhaps there is a blockage in it. It needs to be cleared.
- Are the detergents you use suitable for your machine?
- Are you using too much laundry detergent? We recommend using measuring cups.
- Perhaps you loaded porous or fluffy items? In that case, you should have used half as much detergent.
- Try changing your detergents to better quality ones.
What should you do if the wash cycle doesn't finish, there's too much foam, and error 5 appears?D, SUD, SD on a washing machine Samsung
Try to interrupt the wash cycle yourself: activate drain mode Or try opening the door and removing the laundry. Afterwards, clean the drain filter and run the washer without laundry or detergent on the longest cycle at a temperature of at least 60°C (140°F). This will help remove any excess detergent that could impede normal operation.
If there's no foam and the SUD error persists, the problem is likely more serious. In this case, we recommend seeking professional help.
Possible problems that need repair
Believe me, our specialists are no strangers to error 5d. Here's a table listing the most common causes of the error.
| Symptoms of the error | Possible cause of occurrence | Replacement or repair | Price for work and consumables |
| There's no foam in the drum, but the error persists. A dry wash didn't work. | The problem is with the foam sensor. | The sensor will have to be replaced. | Starting from 3000 and ending at 4500 rubles. |
| The sud error in the washing machine appears immediately after starting or during the washing process. | The problem may be a faulty water level sensor. | The sensor should be replaced. | Starting from 2900 and ending at 3900 rubles. |
| Without using washing powder, the machine operates normally; with powder, error 5d appears. | The problem is in the drainage system. There's a blockage somewhere. | The drain hose, pipe or sewer needs to be cleaned. | Starting from 1000 and ending at 2500 rubles. |
| Error 5d, sud or sd appears in any case in a Samsung washing machine. | This is a rather rare case, the problem is in the control unit. | The solution depends on the extent of the damage. Repair or replacement is possible. | Repairs – from 3800 to 5500 rubles. Replacement – starting from 7000 rub. |
**Repair prices shown include the cost of consumables. The final cost can be determined after diagnostics.
If you have not been able to resolve the 5d, sud, or sd error on your Samsung washing machine on your own, you should seek professional help.
During the conversation, you will be able to choose the most convenient time for the arrival of a specialist who will conduct free diagnostics and will carry out high-quality and fast repairs.
