During the operation of the washing machine, a situation may arise when washing is impossible due to breakdownsOf course, there may be several reasons for termination of work.
But the drive belt often slips on a washing machine. This isn't a serious problem and can be solved.
What is a drive belt?
The drive belt is a vital component in a washing machine. It keeps the drum rotating, which is essential for washing.
The belt is the connecting link between the drum pulley and the motor, and if it breaks or comes off, the machine stops working. A drive belt will last for many years with proper maintenance.
Is it possible to visually tell if there is a problem with the drive belt?
Yes, you can. If drum If it makes a scraping sound when rotating and can be unscrewed very easily by hand, then most likely the problem is in it.
Why does the belt fall off on my washing machine?
The belt usually slips after several years of regular use, but even in new machines this problem can occur if the machine itself is of poor quality or the load of laundry significantly exceeds the norm.
At drum overload scrolling occurs, which leads to the belt slipping off.
Sometimes this situation repeats itself and the washing machine belt keeps coming off, which means you won't be able to do without professional diagnostics and help.
The most common causes of belt problems can be:
Insecure drum pulley mountingThe belt will inevitably slip off or break if the fasteners that hold the drum are weak and move from side to side. As a result drum it may even jam.
Engine mount problemsJust like with the pulley, the fasteners can become loose and the belt will not be sufficiently tensioned, causing it to slip. To solve this, remove the rear cover of the car and tighten the fasteners. Then, reinstall the belt.
Belt wear due to long-term useThe belt stretches from long-term use and stops working. The machine whistles when spinning and produces almost no spin. Sometimes, the machine stops working altogether.
Bearing wearThis can cause the drum to become crooked, which can lead to the washing machine belt slipping. You may need the help of an experienced technician.
The shaft or pulley is deformedWhen the belt came off in the washing machine, pulley may bend and damage important parts of the equipment.
Weak belt tension. If the drive belt is not tensioned correctly or is the wrong size, it will inevitably fall off. When purchasing a belt, use the worn belt installed by the manufacturer as a guide or consult a professional.
Rare use of the machineIt turns out that infrequent use is also a cause of drive belt problems, as it can dry out, crack, and lose elasticity.
The drum crosspiece has become loose. This imbalance is also a direct cause of the drive belt slipping.
There are many reasons why a washing machine belt might come off. Correctly diagnosing the root cause requires skill and experience.
Replacing the belt
To carry out repairs yourself, the following steps are recommended:
- The washing machine is de-energized and disconnected from the water supply.
- The back cover is removed.
- The worn belt is removed by pulling it toward you with one hand, while turning the pulley with the other and pulling it off.
- The new belt is first placed on the motor shaft.
- It is pulled onto the pulley in a similar manner by rotating it.
- The machine is assembled and washing is started in test mode.
When changing the drive belt, it's important to pay attention to adjacent components, sensors, and wires. The belt may have damaged them and they may need to be replaced.
A person even without special training and experience can replace the worn belt with a new one, following the instructions.
Is it possible to install a 1270J4 belt instead of a 1272J4 belt on a whirlpool washing machine?