How to install a washing machine correctly

In the modern world, technology plays a huge role in people's lives. It's hard to imagine a home without a stove, vacuum cleaner, or washing machine.

One of the most important helpers in everyday life is washing equipment.

And not just any equipment that makes incredible movements around the room before washing or spinning the laundry, but smart automatic machines.

This article will discuss how to install a washing machine correctly, but if you want a clean workplace, office cleaning will help you

Before installation…

What will happen to the warranty?

First, before you begin installation, you need to consider whether the warranty will be valid if you install it yourself.

If this issue is resolved or not so important, then you can confidently take action and start by figuring out how to install a washing machine yourself. It's not difficult.

Preliminary check

After purchasing a washing machine and having it delivered to your home, it would be a good idea to perform some maintenance, or, more simply, check the appliance for defects.

To do this you need:

1. Unpack the equipment.
   Please note: The machine may not fit properly or may not work at all, so please keep the packaging material for a few days.
2. Check for damage.
   Look for dents and scratches on the machine body that are visible to the naked eye;
3. Rock the car from side to side.
   If you hear a characteristic knocking sound or strange noise, it is better to refuse such a product.

Read the instructions

So, you've acquired an indispensable household assistant. But before it can begin performing its functions, proper installation is essential. It's a good idea to carefully read the instructions included with any appliance and learn the nuances to avoid installation errors.

Installing a washing machine

Preparatory stage

Tools and materials

What you will need to properly install your washing machine:

• cold water supply, tap with three-quarter inch thread;
• a tap for cars, with the help of which the water supply is closed and opened;
• sewer outlet. This is usually a 32 mm pipe;
• A valve installed on the sewer pipe to prevent water from flowing backwards. This usually doesn't happen because the floor is 80 cm or more above the sewer pipe;
• spanner;
• clamp for a secure connection between the hose and the sewer;
• A 10-20 volt outlet for the washing machine should be installed in advance. It should have a cover to protect against accidental moisture and the resulting electric shock.

Choosing the right location for your washing machine is half the battle in its proper installation and operation.

Choosing a location

It is at this stage that you need to decide where to install the washing machine.

It is placed on a hard horizontal surface.

In a small room, it is better to remove unnecessary items so that nothing interferes with the installation of equipment.

Make sure the washing machine's cord reaches the outlet and is free, not taut. For example, installing a washing machine under a kitchen countertop is a good option, or, more traditionally, in a bathroom.

Preparing the car

We've decided on the location, now it's time to get to work on the car.

1. Remove excess film and other unnecessary elements from the machine.
2. Remove the shipping screws securing the tank. Use a wrench appropriate for the screw diameter.
3. To avoid damage to the washing machine drum, it is necessary to remove all installed fasteners required for transportation.
4. Close all resulting holes with plugs.

Installation stage

Setting up the stand

It's crucial to install your washing machine correctly so it doesn't bounce. This can be achieved by adjusting the height of each foot on the machine.

This way, you ensure maximum stability during washing. So, here's what you need to do:

• select the height of the stand so that the machine does not shake during operation;
• install the equipment horizontally relative to the floor.

Compliance with these conditions will guarantee the stability of the automatic washing machine and will protect it from unnecessary noise caused by improper installation.

Even the slightest deviation will cause unnecessary vibrations. After each leg is adjusted to the correct height, they are tightened.

To prevent the washing machine from sliding on the floor, you can install rubber feet on the washing machine or lay down a rubber mat.

Setting up the electrical network and grounding

The cord, secured to the rear wall of the equipment, is connected to a grounded network.

If there is no outlet at all, it is better to call a specialist who will install one with proper grounding.

Otherwise, the washing machine will give you an electric shock.

We connect to the sewerage and water supply

Let's figure out how to install a washing machine drain. All washing machines are connected to the cold water supply via an inlet hose.

Next, the drain hose automatically draws water into the sewer pipe, so the connections must be tight.

The hose is connected using a plastic port on the back wall of the machine.

It is attached to the bathroom sink or washbasin using a hook and should not be higher than 90 cm.

In addition, it is necessary to install a shut-off valve in case the equipment will not be used for a long time and for convenient dismantling.

Then turn on the washing machine and check for water leaks at the connections. If everything is OK, the washing machine is ready for use.

The final stage

We are performing a control check

Signs that can help you determine whether your washing machine is installed correctly:

1. No leaks.
2. The tank fills with water quickly.
3. The drum is rotating.
4. Water heats up in 6-7 minutes.
5. There are no incomprehensible sounds.
6. Draining and spinning are carried out efficiently.

If all of this is present, then the washing machine is installed correctly and will work for a very long time.