
If your new washing machine was installed by a professional, you can safely skip the tips below. If you installed the machine yourself or had a friendly neighbor/friend/colleague install it without the necessary training, you should make sure everything was done correctly.
Checking the readiness of a new washing machine for the first wash
To prepare, please read and follow these steps:
Check to see if the shipping bolts are loose. These bolts are needed to secure the washing machine drum during transport. They are located on the back of the new washing machine. If you find them, the machine is still not plugged in. First, remove these shipping bolts. Then, after removing them, cover the holes with special plugs. These are usually included with the machine.
Find out the hardness of your tap water in advance. This will help you choose the right type. washing detergent, and decide on the quantity.
- Check the machine's connection to the network, sewerage system and water supply.
- Check the position of the tap that shuts off the water to
inlet hose.
- Throw dirty laundry into the bin.
- Pour the required amount of powder into detergent tray.
- Select a washing program and then start the machine using the “Start” button.
- Don't worry if the washing machine doesn't open its lid right away after the wash cycle is finished. tankIn many models, you often have to wait 1 to 3 minutes for the machine to unlock and allow you to unload your washed items.
Majority repairmen It is recommended to carry out the first wash in the washing machine without laundry.

Read the instructions!
Before using your new washing machine, we recommend that you carefully read the instructions included with the device.

If you start using the washing machine following the instructions and tips, you can avoid a host of difficulties, potential breakdowns, and other problems with your appliance. Furthermore, proper use of the washing machine will extend its lifespan. To do this, carefully read the instructions. instructions and follow all the rules for the correct use of this device.
Even if you're already familiar with one or more washing machine models, we still recommend at least reading the manufacturer's instructions.
Tips for washing your washing machine correctly for the first time
Wash whites and colors separately. This will prevent light-colored items from discoloring.
- When the machine is not in use, leave it Luke Keep the door slightly open. This will allow all the moisture in the drum to evaporate and prevent it from stagnating. This will help prevent unpleasant odors and even prevent some breakdowns.
Clean regularly filter Disconnecting the drain pump is easy and simple, as most models have it located in the lower right corner of the washing machine. This will prevent unpleasant odors and reduce the risk of breakdowns.
- Make sure there are no dirty items in the pockets before loading them into the drum. Small trinkets, rings, coins, and other items can damage the machine, while sharp objects like pins can puncture the door seal, causing ongoing leaks.
- To ensure a high-quality wash, use only detergents designed for automatic washing machines. And don't use more than 100 grams per wash cycle.
So, once again, we congratulate you on the purchase of a washing machine.
Be sure to run your first load of laundry in your new washing machine without any laundry. This technological marvel will make your life easier and give you tons of free time.






