The washing machine freezes
The washing machine sets the wash time depending on the mode you select. It can range from 30 minutes to several hours. Sometimes the wash time changes slightly due to external factors, such as low water pressure in the pipes, the laundry being rewound during the wash cycle, etc. However, if the washing machine takes significantly longer than the 2 hours specified in the program, this is cause for concern, and most likely The washing machine freezes.
Installation error or pump failure
Firstly, a prolonged wash cycle can be mistaken for what's known as self-draining. Self-draining of the washing machine's tank occurs when the manufacturer's installation requirements weren't met and the drain hose isn't secured at the correct height. If the drain hose isn't raised to the roof of the machine, water will flow out of the tank into the drain, and the machine will continue to fill with water. This can continue for quite a while, in this case. the washing machine freezes This is because the water level sensor isn't signaling the start of the wash cycle because there isn't enough water in the drum. Secure the drain hose to the height specified in the instructions, and the problem will resolve itself.
It's also possible that water leakage is caused by a faulty drain pump. Therefore, even if the drain hose is properly secured, water continues to drain and fill—the only solution is to replace the pump.
Blockage in the drain hose, pump filter or pipes
A clogged drain hose will prevent water from draining properly. Since water drains slowly, washing times will increase. Small items left in pockets, as well as lint, hair, and threads, can clog the drain hose or filter over time, so these washing machine components need to be cleaned periodically.
The heating element has failed
During the wash cycle, the washing machine heats cold water to the required temperature. If the heating element begins to work intermittently, the time it takes to heat the water to the required temperature increases, and the washing machine freezesThe only solution in this situation is to replace the faulty part.
The electronic module is broken
A malfunction in the washing program could also be caused by a faulty electronic control module. It's best to call a qualified repairman to repair the electronics.
So when the washing machine freezesThere are objective reasons for this. We've outlined the main ones in this article, but it's best to entrust their elimination to a professional.
