If you have noticed that your device has been working much worse lately, then most likely the problem arose due to clogged washing machine filter, which is designed to protect the structure from getting unnecessary parts inside.
Now it's time to learn how to clean the washing filter on an Indesit washing machine, and whether it's possible to do it yourself without the help of service center staff.
What is a washing machine pump filter and how do I find it in my machine?
Each automatic washing machine has a special filter, which is pump drain filter. It is usually associated with with a pump The washing machine itself. Its main function is to purify the water during the wash cycle and prevent all kinds of debris and small items, such as coins and shirt buttons, from getting into the drum.
But not every owner of their assistant knows where exactly it is located. filter in a washing machine, but it's still better to find out this information in advance so you can understand for yourself how best to clean the filter in your home.
Important: In some particularly serious cases, you should not disassemble the machine yourself. It's better to contact a washing machine repair specialist for help.
This essential component is hidden at the bottom of our design, regardless of the load type. You've likely already noticed the small panel at the bottom, which is covered by the housing. The drain filter is located underneath.
Removing it is not difficult: all you need to do is pry it up with scissors (preferably not sharp ones) or a flat-head screwdriver.
Once the operation is complete, you'll see the filter cover, which has a special handle. This part is typically black in washing machines, particularly Indesit machines, and is fairly easy to locate, but in some cases, its location varies. Once you've successfully removed the cover, you can proceed to the next step—removing the part itself.
Technique for removing parts
Once you've found the part you need, you should carefully remove it so you can move on to the most important part – cleaning the washing machine filter.
It's important that you get it out as carefully as possible, as you may accidentally damage other fragile parts of the machine.
Always remember that the surge protector in Indesit designs is made of extremely thin plastic. Therefore, when removing it, carefully pry it out with the screwdriver we already mentioned. from both sides and remove it only at the moment when it begins to move away on its own, but do not pull it towards yourself.
In general, removing a filter from an automatic washing machine is not that difficult if we are talking about regular filters: you just need to turn its cap counterclockwise.
Be sure to have a dry, absorbent cloth ready in advance. This will allow you to quickly wipe away any excess water that will inevitably leak out when removing the filter. Place the cloth under the panel that covers the filter pump before removing the part.
To do this, turn it a couple of turns counterclockwise and pull it out towards you.
After this, you can begin cleaning using one of several well-known methods. Cleaning a washing machine filter usually doesn't take much time if you do everything correctly and quickly.
Here are a few ways to clean your Indesit washing machine filter.
A standard Indesit washing machine filter gets clogged approximately every six months. It should be removed and cleaned after this period. manually.
To avoid any problems, some people rinse the part under running water. If the filter is heavily soiled, they clean it with a toothbrush, or they can soak the part in a citric acid solution to remove any dirt. plaque removal from lime and unpleasant odor.
Some washing machine models come with step-by-step instructions on how to clean your washing machine's filter. This usually includes: the following algorithm:
- Remove all laundry from the drum and disconnect the appliance from the control panel and from the power supply.
- Locate the panel and cover on the panel.
- Open the lid slightly and carefully remove your part.
- Completely clean the filter located there, as well as the hole into which the part is inserted.
- Once you are finished cleaning, put the part back in place and close the lid.
Even the filter hole often accumulates debris. It's easy to remove it if you have a convenient tool for removing debris and a conveniently mounted flashlight for more effective cleaning.
Potential problems
If you are performing this procedure for the first time, you may encounter some difficulties (of course, this is not without its difficulties, after all, it is the first time).
Sometimes the filter located inside the panel can be difficult to remove, or the plastic cover can break if you move it too much. This often happens when the part hasn't been removed from the machine since purchase and is so dirty that it's stuck inside. If you can't remove the part yourself, call in an experienced person who knows better than you what to do.
And never, never wait until your machine becomes completely clogged and stops performing its duties properly.
This problem is easily prevented by performing a thorough cleaning every six months. This will ensure your machine lasts as long as possible.
