How to replace a washing machine pump yourself

If your drainage system is broken, it needs repairs urgently, specifically the pump that serves as the drain needs to be replaced.

As the best option, we recommend you to trust to the masters on this issue. However, if repairs are urgently needed, you can do it yourself. If you're not one of those people who takes their washing machine to a repair shop for every minor problem, we'll tell you and together we'll figure out how to repair and replace the drain pump yourself.

The location of the pump in the washing machine and how to get to it

Every automatic washing machine is equipped with a drain pump, which is one of the main components of the system, so every owner of a washing machine should know where the pump is located in their machine.

Basically, all the elements of the washing machine are located at the bottom, and the pump is no exception.

The pump in a washing machine can be located in completely different places, depending on the model of the machine and its manufacturer.

To access the main components of your washing machine, you need to follow three steps:

1. First, de-energize your assistant by simply removing the plug from the socket;
2. Turn the structure on its side (the drain must be at the top);
3. Unscrew and remove the bottom cover.

Once you have completed all the necessary steps, you will be able to examine all the main parts and dismantle them.

All washing machine components are located at the bottom, making them very convenient for repairing parts or cleaning the machine itself.

In such washing designs from manufacturing companies Electrolux and Zanussi Everything is very easy and simple to arrange.

And in order to gain full access to the main elements of the machine, you just need to open the rear panel.

And when removing it, it will be enough to simply move the structure away from the wall, since such models do not require a particularly large space when repairing.

The most difficult to access models are from companies Indesit, Siemens and BoschIn machines from these manufacturers, all important elements are located under the front cover.

To clean or repair such a unit, you first need to remove the loading hatch, which is very difficult if you don’t know how to do it.

Replacing the drain pump

Replacement in a Samsung washing machine

The task is quite simple – replacing a drain pump, which doesn't really require professional help. All you need to know is what the pump looks like and where it's located. You'll need a knife and a Phillips-head screwdriver.

We recommend purchasing a pump for the drainage system similar to the old one.

Let us give you the procedure:

• First you need to remove the fasteners that hold the rear machine cover and remove it;
• In the body itself, at the bottom, you will see a water pump, it is quite easy to identify, at least by drain hose, who is coming to him;
• Disconnect all wires and hoses that go to the pump;
• We slightly loosen the clamps in order to remove the hose and bolts on which the pump is screwed;
• We take out the pump and begin to disassemble it;
• Unscrew the screws that secure the snail;
• We take the motor out of the snail;
• Believe me, the impeller works, it should rotate freely;
• Reassemble the pump according to the previous steps;
• Before putting the pump back in place, you first need to check it.

 

As has already become clear, in order to access the water pump in a Samsung automatic washing machine, where there is no need to remove the back panel, you simply need to lay the machine on its side and replace any necessary component.

Replacing the drain pump in an LG washing machine

We will provide you with the following steps for disassembling the washing machine from LG, if you decide not to waste time and money on specialists, but wanted to make the replacement with their own hands.

In order to replace the drain pump in the washing machine from LG, first you need to open the back panel.

• First you need to pour out all the water from tank machines and turn off the water supply;
• For your convenience, it is best to place the washing machine on its side, having first laid some unnecessary floor rags on the floor so as not to stain the structure;
• In new modern models, in order to open the back panel, you need to remove it with one click, which cannot be said about older machines, in which the panel needs to be unscrewed;
• We disconnect the pump from the housing. The bolts holding it in place are located on the outside, near the drain valve;
• Press and pull the pump towards you;
• Disconnect all wires going to the pump;
• Drain the water from the pump (if equipped) and then loosen the clamps holding the drain hose;
• We remove the pipes and hoses and remove water from them;
• If the volute is in good condition, there's no point in replacing it. Install the old volute into the new pump (to remove the volute from the old pump, you need to unscrew the bolts holding it in place);
• We screw the old, reliable volute to the new pump and reassemble everything in reverse order. First, screw the pump to the volute, and then connect the pipes, hoses, and wires.

As you can see, the repair is quite simple and doesn't require much effort. However, if you encounter serious problems, we recommend contacting a service center.

Replacing the pump in the drain system of a BOSCH washing machine

Some problems may arise when disassembling a Bosch washing machine, but the main problems will be in assembling and disassembling the machine.

When replacing the pump in models from We recommend watching video reviews from BOSCH experts.

Let us give the necessary order of actions:

• First, we need to remove the front panel; there shouldn’t be any problems with it, since the machine is front-loading;
• We take out the detergent drawer and loosen the screws on the right side, at the bottom;
• After that, we take out the screws near the drain tank and remove the bottom cover;
• Next you need to remove cuff in the loading door: to do this, you first need to take a screwdriver and use it to remove the ring holding the rubber band, after which we carefully remove the cuff;
• Then we remove the front panel;
• Disconnect all wires from the pump;
• To remove the pump, you need to unscrew three screws on its back;
• Install the new pump in place of the old one and reassemble the unit in reverse order.

When replacing or repairing the pump in Bosch models, you need to be aware of certain details, such as whether there is a risk of damaging machine components or whether the contacts in them are broken.

As it turns out, you don't need to call in a professional to fix your drain pump; you're your own master. However, don't rely on your skills too often, as things can go wrong, and you'll have to take the equipment to a service center and pay for even more expensive repairs.

But still, if you're 100% sure you can handle the problem, then you can tackle it. Happy renovation!